Evaporator Temperature Sensor (Switch) Replacement Cost Estimate
Concerned about potential overpayment for your evaporator temperature sensor (switch) replacement? Utilize MyMechanic to receive an accurate cost estimate for your evaporator temperature sensor (switch) replacement.
✔ No spam ✔ Compare shops near you
✔ Always know how much you should pay
How much does it cost to replace an evaporator temperature sensor?
You can expect an average evaporator temperature sensor replacement. However, the exact cost will depend on your vehicle.
How much does it cost to replace an evaporator temperature sensor?
Due to its placement between the firewall and dash, accessing and replacing the sensor can be challenging. The time required for replacement can vary based on the vehicle, with a skilled mechanic typically spending between three to seven hours to complete the service.
How did we estimate these prices?
My Mechanic experts researched and collected data from 2500+ real repair shops in all states in Malaysia, including everything from the total cost of repair services to the hourly labor cost for mechanic labor in each shop. We combined that data with our expert database of hundreds of real repair jobs, thousands of real cars, millions of real car part prices in order to best estimate the cost of each repair service. Our labor cost estimate is calculated by taking the average hourly labor rate for a certified MyMechanic in Malaysia, times the number of hours it takes on average to complete a repairs
What parts do I need for my evaporator temperature sensor replacement?
Refer to your vehicle repair guide and owner’s manual for comprehensive details about your car’s HVAC system. However, here's a general overview of the parts you might require:
- Seals and o-rings: It’s a good idea to replace the seals and o-rings when you replace the sensor. These can vary in price from lower values to higher ones.
- RefrigerantDepending on your car, you may have to evacuate and recharge the AC system refrigerant. Refrigerant can vary in price from lower values to higher ones.
For automotive repair tasks, original equipment manufacturer (OEM) parts are typically the preferred choice. These parts are tailored to fit your vehicle precisely, backed by a manufacturer's warranty, and crafted from dependable, top-grade materials.
Alternatively, aftermarket parts are readily accessible at various stores and often come at a lower cost. Although some aftermarket parts may have lower quality, there are premium options available. If you opt for aftermarket parts, ensure to verify the part number to ensure compatibility with your car's new sensor.
You can buy OEM parts from your local dealership or authorized parts supplier. You can purchase aftermarket parts from your local auto parts stores
Where can I get my evaporator temperature switch replaced?
Handling auto repairs without a reliable mechanic can be quite daunting. However, you can rely on MyMechanic's to ease your frustrations by providing cost comparisons across 2,500 repair shops throughout the Malaysia.
MyMechanic compares fair price estimates* from each shop based on their actual hourly labor rates. This means you won't need to engage in fruitless searches. With MyMechanic, you gain access to crucial information such as cost estimates (with or without service costs) and authentic reviews, all aimed at helping you make informed decisions and choose the best service for your needs.
How did we vet these shops?
My Mechanic experts researched 2500+ real repair shops across the Malaysia. We talked to real shop customers, and analyzed both real shop pricing data and thousands of real customer reviews from each shop to verify them individually.
How will a mechanic replace my evaporator temperature sensor?
If you're curious about the process of replacing your evaporator temperature sensor, here are the typical steps your mechanic will take:
- Disconnect the car battery
- Remove the dashboard
- Locate the AC evaporator core
- Locate the evaporator temperature sensor on the evaporator
- Disconnect the sensor’s electrical connector
- Remove the sensor’s mounting bolts
- Remove the old sensor
- Connect the electrical connector
- Replace all of the dash panels and components
- Start the car and turn on the air conditioner
- Wait five minutes to ensure that the AC is blowing cold air
- Turn the car off
- Start the engine again and turn the AC off
- Ensure that no cold air is blowing
- Take the car for a 10-mile test drive with the AC on to ensure it works properly
After ensuring everything appears normal, your mechanic will restart the vehicle and clear any engine codes sent by your car’s computer.
What happens if I don’t replace my evaporator temperature sensor?
If you don’t replace a malfunctioning evaporator temperature sensor, you’ll likely face the following issues:
- Poor cooling:
- Inconsistent temperature control:
- Reduced fuel economy:A malfunctioning AC system can strain the engine, potentially resulting in higher fuel consumption.
- HVAC system damage: Neglecting a defective evaporator temperature sensor could cause further harm to the HVAC system, such as damage to the AC compressor and compressor clutch.
What is an evaporator temperature sensor?
The air conditioning evaporator temperature sensor, also referred to as an evap temperature switch, evaporator temp sensor, or evaporator core temperature sensor, monitors the refrigerant temperature in the AC evaporator core. This sensor provides vital information for the AC system to regulate the cooling process and ensure a steady cabin temperature.
When should I replace the evaporator temperature switch on my car?
As there are no predetermined replacement intervals for the evaporator temp sensor, you'll only need to replace it when signs of failure become apparent. Here are the most prevalent indicators that a new sensor is needed:
- The AC system doesn’t blow cold air:A prominent sign of a faulty evaporator temperature sensor is insufficient cold air from the AC system.
- The AC temperatures fluctuate:Fluctuating AC temperatures often indicate a defective evaporator temperature sensor. When the sensor sends inaccurate signals to the computer, it can cause erratic behavior in the AC system. This may lead to temperature fluctuations between hot and cold, increasing stress on the system.
- The AC compressor doesn’t turn on:The evap temperature sensor is crucial in controlling when the compressor activates and deactivates. If the sensor malfunctions, it might prevent the compressor from operating entirely.
Remember that these symptoms could also signal other HVAC problems, such as a malfunctioning condenser or a worn cabin air filter. For an accurate diagnosis, it's best to consult a professional mechanic.How often should I replace my evaporator temperature sensor?
The evaporator temperature sensor doesn't require regular maintenance and doesn't have specific replacement intervals. You'll only need to replace it if it malfunctions. Common signs of sensor failure include fluctuations in AC temperature and insufficient cold air.
Can I replace my evaporator temperature switch myself?
Replacing an AC evaporator temperature sensor is not a straightforward DIY project. It demands a mid-to-advanced level of automotive repair skills and an understanding of car HVAC systems. While experienced home mechanics may manage, beginners are advised to seek assistance from a professional.
FAQs
The location of the evaporator temperature sensor can vary depending on the vehicle. However, in many cars, it is positioned on the evaporator core, situated between the firewall and dashboard.
Here are the most prevalent indicators of a faulty evaporator temperature sensor:
A common diagnostic trouble code (DTC) associated with the evaporator temperature sensor is P0535. This code signifies that the sensor's voltage readings are either lower or higher than the normal range.
