Blower Motor Switch Replacement Cost Estimate

Worried you might overpay for your blower motor switch replacement? Use My Mechanic to get a fair cost estimate for your battery replacement.

✔ No spam ✔ Compare shops near you

✔ Always know how much you should pay

Battery Repair Image

How much does it cost to replace a blower motor switch?

The average cost to replace a blower motor switch depends on factors such as your vehicle's make and model, as well as labor rates in your area.

How long does it take to replace an HVAC blower motor switch?

Typically, a certified mechanic can replace the switch in approximately 0.7 hours. This includes time for a brief inspection of the HVAC system and diagnostic procedures.

How did we estimate these prices?

My Mechanic experts researched and collected data from 2500+ real repair shops in all states in Malaysia, including everything from the total cost of repair services to the hourly labor cost for mechanic labor in each shop. We combined that data with our expert database of hundreds of real repair jobs, thousands of real cars, millions of real car part prices in order to best estimate the cost of each repair service. Our labor cost estimate is calculated by taking the average hourly labor rate for a certified MyMechanic in Malaysia, times the number of hours it takes on average to complete a repair.

What parts do I need for my blower motor switch replacement and how much do those parts cost?

You don’t need many complicated parts to do the replacement. Here’s all that you need:

  • New blower motor switch: This component enables you to activate and regulate the climate system in your vehicle. Depending on your car model, the switch may resemble a plug and may or may not include a replacement knob.
  • Tools:
    • Allen wrenches
    • Deep-well socket set
    • Plastic trim panel tool
    • Open-end wrench
    • Screwdriver set
    • Owner’s manual

We recommend purchasing these parts from MyMechanic. Reputable options are advisable for their reliability. However, recommended options may vary based on your vehicle's specific year, make, and model.

If you're having the repair performed at a dealership service center, they'll typically use OEM (Original Equipment Manufacturer) parts. If you're handling the repair yourself, it's advisable to opt for OEM parts to ensure they fit your vehicle precisely and to avoid the risk of voiding your car's warranty. While aftermarket parts are an option if OEM replacements are too costly, make sure to verify that the part number matches your vehicle's switch.

You can purchase a replacement aftermarket blower motor switch from MyMechanic or contact them for further assistance.

Where can I get my blower motor switch replaced?

Finding a mechanic to replace your blower motor switch can be challenging, especially if you don't have a trusted garage. However, you can get your blower motor switch replace at MyMechanic in Malaysia. Additionally, consider using a service to compare prices from a wide range of reputable auto repair shops. This service assesses fair price estimates from each auto shop, taking into account their hourly labor rate. It also helps you determine if diagnostic fees are included in the service cost and provides honest reviews to aid in your decision-making process.

How did we vet these shops?

My Mechanic experts researched 2500+ real repair shops across the Malaysia. We talked to real shop customers, and analyzed both real shop pricing data and thousands of real customer reviews from each shop to verify them individually.

How will a mechanic replace my blower motor switch?

The process of replacing the switch is relatively straightforward. If you're having your car serviced, the mechanic will likely have already disassembled part of the HVAC (Heating, Ventilation, and Air Conditioning) system during the diagnosis of the faulty switch. To complete the replacement, here are the steps they'll typically follow:

  • Disconnect the battery: As a safety precaution, the mechanic will put on safety glasses and disconnect the car’s battery at the negative cable.
  • Remove the knob: Typically, the mechanic can simply pull off the knob, but there are sometimes screws they’ll have to remove first.
  • Disconnect the blower motor switch: The mechanic will access the switch by removing some of the trim.
  • Remove the bad switch: Using pliers or a similar tool, the mechanic will pinch the tabs holding the switch’s wires in place to pull out the old switch.
  • Install a new blower motor switch: Next, they will push the wire component of the switch into the empty slot.
  • Reattach the trim panel and test the system: The mechanic finishes by reassembling the trim and pushing the knob back. They’ll test the system by reconnecting the battery and running the motor.

What happens if I don’t replace my blower motor switch?

Driving without a functioning HVAC system can be uncomfortable and potentially hazardous, especially in extreme weather conditions. Without a working system, you won't be able to use the air conditioning during hot weather, and the heating system may fail to provide warmth in cold conditions. Additionally, you may encounter difficulties in defrosting your car's windows, leading to impaired visibility while driving. Therefore, it's advisable to address any issues with your HVAC system promptly to ensure a comfortable and safe driving experience.

What is a blower motor switch?

The blower motor switch serves as a control mechanism for your vehicle's HVAC (heating, ventilation, and air conditioning) system. Its primary function is to regulate the flow and temperature of air circulated within the passenger cabin. When activated, the blower motor propels either hot or cold air generated by the heater core or air conditioning unit into the interior of the vehicle. By adjusting the blower motor switch, you can customize the temperature and airflow according to your preferences. Typically, these switches feature labeled settings, including numerical values and symbols, allowing you to set the desired temperature and airflow for optimal comfort while driving.

How do I know if my blower motor switch is bad?

If the heating and cooling in your car act up, even a little, there’s probably something wrong. Here are the most common signs of a bad blower motor switch:

  • The heating or air conditioning doesn’t work
  • The heating or AC works intermittently
  • The switch functions only on specific settings
  • The switch remains stuck on one setting
  • The switch shows signs of physical damage, such as cracks or breakage

It's important to note that while some cases of a faulty blower motor switch are evident, others may require the expertise of a mechanic to diagnose the issue accurately within the HVAC system.

How often should a blower motor switch be replaced?

Theoretically, the blower motor switch should endure the vehicle's lifespan. However, due to frequent usage, these switches often wear out over time. It's advisable to consider replacing the blower motor switch once it begins to exhibit erratic behavior.

It's important to note that blower motor switches are typically not included in routine maintenance checkups. If you suspect that the switch is malfunctioning, it's recommended to schedule an inspection to assess its condition.

Can I replace my blower motor switch myself?

Replacing a door lock switch can be a bit challenging, but it's achievable if you're comfortable using the required tools and know the part number for your specific vehicle model. However, if you're uncertain or hesitant, don't hesitate to seek assistance from an experienced mechanic. Your safety and the proper functioning of your vehicle are top priorities, so there's no shame in asking for help when needed.

FAQs

Since the switches are usually made of plastic, and they get constant use throughout the year, the blower motor switches can wear out over time.